Extech Instruments AN100 User Manual
Cfm/cmm thermo anemometer
Hide thumbs
Also See for AN100:
- User manual (10 pages) ,
- User manual (10 pages) ,
- User manual (10 pages)
Advertisement
Table of Contents
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Extech Instruments AN100
Summary of Contents for Extech Instruments AN100
- Page 1 User's Manual CFM/CMM Thermo Anemometer Model AN100...
- Page 2 AN100-EU V3.0 11/07 LCD Displa Backligh Used to record and store the h ighes t, lowe st rea dings volume Congratula Anemometer. Thisinstrument measuresAir Ve Temperature. The large, easy-to-read backlit LCD includesprimaryand secondary displa calibrated and wi th proper use wil l provide yearsof rel iab •...
-
Page 3: Display Layout
RECORD: indicates that min/max function is running (top for temp, bottom for air) Large LCD digits at center of display for Relative Humidity and IR Temperature Smaller LCD digits at top, right of display for Probe Temperature : Low battery indicator AN100-EU V3.0 11/07... -
Page 4: Operation
5. To return to standard velocity measuring mode press and hold AVG button until meter beeps twice. Note: In the standard velocity measuring mode, press the AVG button once to recall the previous average. The average will be cleared when you enter the Averaging Mode again. AN100-EU V3.0 11/07... - Page 5 5. To return to standard airflow measuring mode press and hold AVG button until meter beeps twice. Note: In the standard velocity measuring mode, press the AVG button once to recall the previous average. The average will be cleared when you enter the Averaging Mode again. AN100-EU V3.0 11/07...
- Page 6 2. The HOLD indicator will appear in the bottom of the LCD display. 3. Press HOLD again to return to normal operation. MAX/MIN/AVG Record (Air Velocity/Air Flow) This allows the user to record and view the highest (MAX), lowest (MIN) and average AN100-EU V3.0 11/07...
-
Page 7: Battery Replacement
WARNING: To avoid electric shock, do not operate the meter until the battery cover is in place and fastened securely. NOTE:: If your meter does not work properly, check the fuses and batteries to make sure that they are still good and that they are properly inserted. AN100-EU V3.0 11/07... -
Page 8: Specifications
Main instrument: 7.0 x 2.9 x1.2" (178 x 74 x 33mm) Sensor Head: 2.75” (70mm) Diameter Copyright © 2007 Extech Instruments Corporation All rights reserved including the right of reproduction in whole or in part in any form. AN100-EU V3.0 11/07... - Page 9 1 knot 0.2778 54.69 0.54 0.6222 1 km/h 0.4464 87.89 0.8679 1.6071 1 MPH more info for Extech AN100 Phone: 01235 838 555 E-mail: cs@airconcern.co.uk web: www.airconcern.co.uk HT30-EU-EN-V3.2--9/11 Air Concern Ltd, Building 173 Curie Avenue Harwell Didcot, Oxfordshire OX11 0QG...
Need help?
Do you have a question about the AN100 and is the answer not in the manual?
Questions and answers