Related Manuals for Extech Instruments AN100
Summary of Contents for Extech Instruments AN100
- Page 1 USER MANUAL CFM/CMM Thermo Anemometer Model AN100 GlobalTestSupply www. .com Find Quality Products Online at: sales@GlobalTestSupply.com...
- Page 2 Introduction Congratulations on your purchase of the Extech AN100 CFM/CMM Thermo Anemometer. This instrument measures Air Velocity, Air Flow (volume) and Temperature. The large, easy-to-read backlit LCD includes primary and secondary displays plus numerous status indicators. The meter is shipped fully tested and calibrated and with proper use will provide years of reliable service.
- Page 3 Press and hold for 3 seconds to switch between °C and °F. Meter will beep twice to indicate change. The Battery compartment is located on the back of the instrument. The rubber protective jacket must be removed from the meter to access the compartment. AN100-en-GB_V3.6 6/18 GlobalTestSupply www. .com Find Quality Products Online at: sales@GlobalTestSupply.com...
- Page 4 Large LCD digits at center of display for Relative Humidity and IR Temperature Smaller LCD digits at top, right of display for Probe Temperature : Low battery indicator AN100-en-GB_V3.6 6/18 GlobalTestSupply www. .com Find Quality Products Online at:...
-
Page 5: Operation
5. To return to standard velocity measuring mode press and hold AVG button until meter beeps twice. Note: In the standard velocity measuring mode, press the AVG button once to recall the previous average. The average will be cleared when you enter the Averaging Mode again. AN100-en-GB_V3.6 6/18 GlobalTestSupply www. .com Find Quality Products Online at: sales@GlobalTestSupply.com... - Page 6 To select and use a previously stored dimension, press and hold the AREA button until it beeps twice. Press NEXT to scroll thru the 8 memory locations. Press and hold the AREA button until it beeps twice to return to CFM or CMM measuring mode. AN100-en-GB_V3.6 6/18 GlobalTestSupply www. .com Find Quality Products Online at: sales@GlobalTestSupply.com...
- Page 7 3. “dis APO” will appear in the display. The AUTO POWER OFF feature will now be disabled. 4. Note that AUTO POWER OFF is re-enabled each time the meter is turned on. 5. Also note that AUTO POWER OFF is disabled in CFM/CMM or Average mode. AN100-en-GB_V3.6 6/18 GlobalTestSupply www.
-
Page 8: Battery Replacement
WARNING: To avoid electric shock, do not operate the meter until the battery cover is in place and fastened securely. AN100-en-GB_V3.6 6/18 GlobalTestSupply www. .com Find Quality Products Online at: sales@GlobalTestSupply.com... -
Page 9: Specifications
725g (1.6 lbs) including battery & probe Dimensions Main instrument: 178 x 74 x 33mm (7.0 x 2.9 x1.2") Sensor Head: 70mm (2.75”) Inside Diameter Sensor Head: 76.2mm (3.0”) Outside Diameter AN100-en-GB_V3.6 6/18 GlobalTestSupply www. .com Find Quality Products Online at:... -
Page 10: Useful Equations And Conversions
1 m/s 196.87 1.944 2.24 1 ft/min 0.00508 0.00987 0.01829 0.01138 1 knot 0.5144 101.27 1.8519 1.1523 1 km/h 0.2778 54.69 0.54 0.6222 1 MPH 0.4464 87.89 0.8679 1.6071 AN100-en-GB_V3.6 6/18 GlobalTestSupply www. .com Find Quality Products Online at: sales@GlobalTestSupply.com...
Need help?
Do you have a question about the AN100 and is the answer not in the manual?
Questions and answers