Time Electronics 1044 Technical Manual page 5

Voltage and current calibrator
Hide thumbs Also See for 1044:
Table of Contents

Advertisement

5
OUTPUT NOISE
<30ppm of f.s. on voltage, <50ppm of f.s. on current
CONNECTIONS
Connections are made by 4mm banana type connectors or may be clamped using the wire
compression feature.
BATTERIES
1 off PP3, 6AM6, MN1604 or 6LR61 type battery.
Battery life is approximately 30 Hours depending on the current sourced. Alternatively an
optional 12V power supply can be plugged into the 2.5mm socket located on the end of the
unit, the tip of the plug should be positive.
PROTECTION
The 1044 can withstand open circuits, short circuits and reverse polarity up to 25V.
Additional protection is by an 20mm F100mA internal fuse.
CONSTRUCTION
Construction is in a durable plastic case with sliding cover for battery storage. Internally the
circuit is built on a single compact PCB with plug in display module. A carry case is also
supplied for moderate protection.
DIMENSIONS AND WEIGHT
Length 142mm (5.6") x Width 75mm (2.9") x Height 50mm (2.0")
Weight 280g (0.6 lbs)
V1.1 09/01/11
P a g e
| 5
1044 Technical Manual

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1044 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents