Setting The Tad To Answer Calls; Setting The Tad Not To Answer Calls; Recording A Memo; Recording A New Outgoing Message - Radio Shack 900 MHz Digital Spread Spectrum Cordless Phone with Digital Answerer and Caller ID/Call Waiting Deluxe Owner's Manual

Note: If the selected mail box contains new
(unplayed) messages, the TAD announces
"Please play back all messages" and does
not delete any message.

Setting the TAD to Answer Calls

At the command prompt, press
announces the current outgoing message,
and sets itself to answer the next call.
Setting the TAD Not to Answer
Calls
At the command prompt, press
announces "Answer off."

Recording a Memo

1. At the command prompt, press
TAD announces "Please select mail
box."
2. Press and the mail box number. The
#
TAD announces "Record your message
after the tone."
3. When you hear the beep, start speaking
your memo.
Note: If the TAD's memory is full, the
TAD announces "No remaining time"
and returns to the command prompt.
4. When finished, press
Note: The length of the memo recorded by
remote operation must be over 2 seconds
and within 4 minutes.
Recording a New Outgoing
Message
At the command prompt, press
announces "Record your outgoing message
after the tone." When you hear the beep,
start speaking your new outgoing message
, . The TAD (up to 30 seconds long). When you finish,
# 6
press
new outgoing message.

Listening to the Help Guide

At the command prompt, press
, . The TAD
# 9
, . The
# 7
, or , .
# 5 # 7
Answering System Operation
, or , . The TAD plays back the
# 5 # 8
, . The TAD
# 8
, .
# 0
29