Caller Id Operation; Call Waiting Options Service; Using Call Waiting Options - Radio Shack 900 MHz Digital Spread Spectrum Cordless Phone with Digital Answerer and Caller ID/Call Waiting Deluxe Owner's Manual

ˆ

Caller ID Operation

If you subscribe to Caller ID service from
your phone company, the phone company
sends information about the call, as well as
the time and date, between the first and sec-
ond rings of every call you receive.
The Telephone Answering Device (TAD) dis-
plays this information after the second ring,
and it stores up to 50 Caller ID records for
later review. It also shows if caller informa-
tion is unavailable or if the name and number
were blocked by the caller (see "Caller ID
Messages" on Page 21).
If the TAD's Caller ID memory becomes full,
any new call replaces the oldest call record.
If you subscribe to Call Waiting and Caller
ID, you will hear a tone through the handset
when a call comes in, then the Caller ID
record appears. If you want to answer the in-
coming call, press
FLASH
previous phone conversation, press
again.
CALL WAITING OPTIONS
SERVICE
With this TAD, you can use Call Waiting Op-
tions Service from your phone company.
This service provides you with more choices
on how to handle a second call when you are
already on the phone. You can switch be-
tween the callers, have a 3-way conference
call with both callers, or answer the second
caller with a prerecorded message asking
them to hold the line.
Before you can use the Call Waiting Options
Services, you must:
• subscribe to the Options service from
your telephone company.

Using Call Waiting Options

Note: An error tone sounds and the phone
exits the menu if you wait more than 20 sec-
onds between each keypress.
You hear a soft beep when a call comes in
while you are already on the phone. The dis-
play shows the caller's name and phone
number.
Follow these steps to use Call Waiting Op-
tions Services.
1. Press
2. Repeatedly press
. To resume the
FLASH
3. Choose one of the following options,
Caller ID Operation
• set the Caller ID/Call Waiting feature to
Opt (see "Turning Caller ID/Call Waiting
On/Off" on Page 13).
MENU . A list of several options,
7iaýjeý>ebZ 7iaýjeý>ebZ
7iaýjeý>ebZ 7iaýjeý>ebZ
beginning with
VOL/CID
through the options list. You can also
press the number of the desired option.
then press .
SELECT
7iaý jeý >ebZ 7iaý jeý >ebZ
7iaý jeý >ebZ 7iaý jeý >ebZ
— A waiting caller hears a
prerecorded message stating that you
will be available shortly, and is put on
9Wbbý>ebZ_d] 9Wbbý>ebZ_d]
9Wbbý>ebZ_d] 9Wbbý>ebZ_d]
hold. appears.
J[bbý8kio J[bbý8kio J[bbý8kio J[bbý8kio
— A prerecorded message indi-
cates you are too busy to take a call,
and the waiting call is disconnected.
8 8 8 8 kio kio kio kio
appears.
7dim[h%:hefý ' 7dim[h%:hefý ' 7dim[h%:hefý ' 7dim[h%:hefý '
— Disconnects the first
call, and connects automatically to the
7dim[h%:hefý'ij ij ij ij 7dim[h%:hefý' 7dim[h%:hefý' 7dim[h%:hefý'
new caller.
9ed\[h[dY[ 9ed\[h[dY[ 9ed\[h[dY[ 9ed\[h[dY[
— Allows you to speak with
your first and second callers to have a 3-
way conference call.
appears.
appears.
9 9 9 9
to scroll
J J J J ebZ ebZ ebZ ebZ
appears.
9ed\[h[dY[Z 9ed\[h[dY[Z
9ed\[h[dY[Z 9ed\[h[dY[Z
19