Placing A Call On Hold; Redialing A Call - Radio Shack 43-3880 Owner's Manual

Ô
NOTES
Making and Receiving
Calls
• The base microphone is
located under the base.
Position yourself as near
to the base as possible.

Placing a Call on Hold

• While a call is on hold,
CIDCW can not be
received.
• If you leave a call on
hold for more than 10
seconds, the display
screen will read,
On Hold .

Redialing a Call

• If the number exceeds
32 digits, only the first 32
digits are retained in
redial memory.
• If the redial memory is
empty, you will hear a
beep.
28
To hang
up
To enter a
pause
within the
dialing
sequence
Ô
From the Base (Receiving calls
only)
1. Press
2. To hang up, press
P
LACING A
You can place a call on hold for five
minutes. When five minutes has passed, the
call is disconnected, and the phone returns
to standby mode. Ô
1. During a call, press
handset or
Line
will be put on hold.
2. To talk to the caller, press
or
on the base). The phone will return
back to the call.
R
EDIALING A
The last three phone numbers dialed can be
quickly redialed from the handset. Redial
numbers stored in the handset are
independent from each other. Ô
1. With the phone in standby mode, press
the
From the Handset
Normal
conversation
Press END or return the handset to
the cradle (Auto Standby).
When you dial the number press the
PAUSE soft key.
display, which represents a pause.
and begin speaking. Ô
SPEAKER
SPEAKER
C
ALL ON
INTCM/HOLD
on the base. The call
HOLD
on a handset (or
SPEAKER
C
ALL
soft key.
REDIAL
Hands-free
conversation
P
appears in the
.
H
OLD
on the
TALK/FLASH
SPEAKER