Selecting The Message Record Time - Radio Shack 43-3880 Owner's Manual

56
3. Press to select the PIN code.
SET
A confirmation tone sounds, the system
announces the new PIN code.
Setting the ring time
The ring time setting allows you to set the
number of rings the caller hears before your
answering system plays the outgoing
message. You can set the ring time to
answer after two, four, or six rings. Setting
"TS" (Toll Saver), the answering system
picks up after two rings if you have new
messages, and after four rings if there are
none. This way, if you make a long distance
call to check your messages, you can hang
up after the second ring to avoid billing
charges.
1. Press
CLOCK/MENU
The current ring time setting (
(Toll saver)) appears on the base and it
is announced.
2. Press
SKIP/SELECT
REPEAT/SELECT
ring time appears.
3. Press to select the new ring time.
SET
A confirmation tone sounds, the system
announces the new ring time.
Selecting the message record
time
You have three record time options. The
options "one minute" or "four minutes" set
the duration for recording the incoming
messages. "Announce only" answers the
call with the preset greeting or your
personal greeting but prevents the caller
from leaving a message.
1. Press
CLOCK/MENU
The current recording time (
a
minutes, (Announce only)) appears
on the base and it is announced.
three times.
2 4 6
, , ,
or
until the desired
four times.
1 minute, 4