Placing A Call On Hold; Redialing A Call - Radio Shack 43-5560 Owner's Manual

Ô Ô
NOTES

Placing a Call on Hold

• While a call is on hold,
CIDCW can not be
received.
• If you leave a call on
hold for more than ten
seconds, the display
Line
screen will read,
On Hold
.

Redialing a Call

• If the number exceeds
32 digits, only the first 32
digits are retained in
redial memory.
• If the redial memory is
empty, you will hear a
beep.
26
From the Handset
Normal
conversation
To hang Press end or return the handset to the
up cradle (Auto Standby).
To enter a When you dial the number in standby
pause mode, press the PAUSE soft key.
within the appears in the display, which
dialing represents a pause.
sequence
P C
LACING A ALL ON
1. During a call, press
call will be put on hold. Ô
2. To talk to the caller, press
. The phone will return back
SPEAKER
to the call.
R C
EDIALING A ALL
The last three phone numbers dialed can be
quickly redialed from the handset. Redial
numbers stored in the handset are
independent from each other. Ô
1. With the phone in standby mode, press
the soft key.
REDIAL
2. Press
VOL/RING/
scroll through the last three dialed
numbers.
3. Press or
talk/FLASH
handset. The selected number is
dialed.
4. To hang up, press
end
Deleting a Redial Record
1. With the phone in standby mode, press
the soft key.
REDIAL
Hands-free
conversation
P
H
OLD
. The
INTCM/HOLD
or
talk/FLASH
or to
VOL/RING/
on the
SPEAKER
.