Setting The Area Code; Setting The Dial Mode - Radio Shack 43-3880 Owner's Manual

Setting CIDCW (Caller ID on
Call Waiting)
Caller ID on Call Waiting (CIDCW) displays
the name and number of an incoming call
while you are on the line. Call Waiting
Deluxe (CWDX) allows you to handle call
waiting calls in seven different ways.
1. Press the
MENU
Global Setup menu, and then the
CIDCW submenu.
2. Press
VOL/RING/
select
CW On
, or
Off CW Off
press the
OK
confirmation tone.

Setting the Area Code

If you enter a 3-digit area code number in
the "Area Code" option, your local area
code does not appear in the Caller ID
message. For calls received from outside
your local area code, you will see a full 10-
digit number. Ô
1. Press the
MENU
Global Setup menu, and then the Area
Code submenu.
2. Press the number keypad (
a 3-digit area code.
3. Press the
OK
confirmation tone.

Setting the Dial Mode

Sets the dial mode to tone or pulse. Most
phone systems use tone dialing; the default
setting is tone dialing. Set the dialing mode
to match the dialing system used by your
local phone service.
soft key. Select the
or
VOL/RING/
/ ,
CWDX On CW On
/ , and then
CWDX Off
soft key. You will hear a
soft key. Select the
- ) to enter
0 9
soft key. You will hear a
to
/
CWDX
Ô
• If the area code has
already been stored in
memory, the stored area
code will be displayed.
To change it, use the
DELETE soft key and
number keys to enter the
new area code.
• If your calling area
requires 10-digit dialing,
do not program this
option.
Ô
NOTES
25