Network Map; Content Of The Network Map Window; Figure 52. Network Map - Xirrus XR-1220 User Manual

Wireless Array

Network Map

This window offers detailed information about this Array and all neighboring
Arrays, including how the Arrays have been set up within your network.
The Network Map has a number of options at the top of the page that allow you
to customize your output by selecting from a variety of information that may be
displayed. You may sort the rows based on any column that has an active column
header, indicated when the mouse pointer changes to the hand icon
Refresh to update the information at any time. Click Auto Refresh to instruct the
Array to refresh this window automatically.

Content of the Network Map Window

By default, the network map shows the following status information for each
Array:

Array Name: The host name assigned to the Array. To establish the host
name, go to "Express Setup" on page
access WMI for this Array.

IP Address: The Array's IP address. You may click the address to access
WMI for this Array. If DHCP is enabled, the Array's IP address is
assigned by the DHCP server. If DHCP is disabled, you must assign a
static IP address. To enable DHCP or to assign a static IP address for the
Array, go to "Express Setup" on page
Viewing Status on the Wireless Array

Figure 52. Network Map

149. You may click the host name to
149.
. Click
99