Assa Abloy DK-16 Manual page 4

YELLOW
SOLID YELLOW (not flashing) – Indicates that the Digital Keypad has no codes
programmed.
SLOW FLASHING – Indicates that you are in the programming mode for the Hard
Code.
RAPID FLASHING – Indicates that you are in the standard programming mode.
RED
SOLID RED – During normal operation this indicates that your door is unlocked.
Typically this LED will go out about five seconds after a User Code or a Hard Code is
entered. This is usually accompanied by a tone during this period. If it stays on for
a much greater period of time or does not ever extinguish then you may want to
call us here at Securitron Technical Support for more detailed instruction.
DOUBLE FLASH – Is displayed while in a PROGRAM mode when you are entering
codes. It is an indication that the Digital Keypad has accepted your entry.
LONG SINGLE FLASH – Is displayed while in a PROGRAM mode and when you are
entering codes. It is an indication that the Digital Keypad did not accept your
entry.
QUICK FLASH – This is a function called Echo. The Red LED will come on you're
your Digital Keypad is programmed for Reversed Light Logic. Each time you press
a key the LED will flash and the sounder should beep. It is the Digital Keypad's way
of telling that you have properly pressed that key.
GREEN
Normally the Green LED will only illuminate in the Quick Flash mode, but your
Digital Keypad has a programmable feature called Reverse Light Logic. If this
feature has been implemented then the Green LED will behave just as the Red LED
was described above. If the Reverse Light Logic is turned on, the Red LED will only
illuminate in the Quick Flash mode.
SOLID GREEN – During normal operation it indicates that your door is unlocked.
Typically this LED will go out about five seconds after a User Code or a Hard Code is
entered. This is usually accompanied by a tone during this period. If it stays on for
a much greater period of time or does not ever extinguish then you may want to
call us here at Securitron Technical Support for more detailed instruction.
Released: 8/27/2009
Securitron Magnalock Corp.
SD-04 Rev. A