Calibration And Verification - Fluke 1746 Calibration Manual

1742/1746/1738
Calibration Manual

Calibration and Verification

The Calibration and Verification sheet are the built-in procedures. See Table 10.
Item
1



22
Table 10. Calibration and Verification in Excel Worksheet
3 4
Verification
Start button – When the selection window  has been closed with Quit, click the Start button again to
open.
Selection window – Click on Verification, Calibration, and Setup tabs to select the action. Close the
window with Quit. Open again with Start .
Verification items – Select Voltage Input, AUX Input or Current Input to verify. For a Logger verification, all
three items must be verified sequentially. Make sure the sensor selector  is set to DIRECT for the
Logger verification. A specific order is not required.
Description
2
5
Calibration
hcf102.eps
6 7
Setup
hcf103.eps