System - D-Link DSL-5300 User Manual

Section 4 - Configuration
This page allows you to save the router's current configuration, load a previously saved
configuration, reset the router to its factory default settings, or reboot the router.
From the Admin page, click System. To return to the Admin page, click Admin.
Save Settings
This option will save the current router configuration settings to a file
To Local Hard on your computer.
Drive:
Load Settings
This option will load a previously saved router configuration file. This
From Local will overwrite the router's current configuration.
Hard Drive:
Restore To
This option will restore all configuration settings back to the settings that
Factory Default were in effect at the time the router was shipped from the factory. Any
Settings:
settings that have not been saved will be lost, including any rules that
you have created. If you want to save the current router configuration
settings, use the Save Settings To Local Hard Drive button above.
Auto Reboot
You may configure the router to automatically reboot at a set time.
Configuration Please note, the router will be temporarily unavailable while rebooting.
Reboot The Click to reboot the router immediately.
Device:
Click Save when you are done.
D-Link DSL-5300 User Manual

System

87