Ipv6 - D-Link DSL-5300 User Manual

Section 4 - Configuration
To configure IPv6 rules, on the Static Routes page click IPv6. To return to the main
IPv4 static routes page, click IPv4.
If you wish to remove a rule, click on its trash can icon in the Delete column. If you
wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a
new rule, click the Add Rules button
create a rule, the following options will appear:
Name:
Enter a name for the rule.
DestNetwork:
This is the IP address of the router used to reach the specified
destination.
PrefixLen: Enter the IPv6 address prefix length of the packets that will take this
route.
Metric:
Enter the metric value for this rule here.
Interface:
Select the interface that the IP packet must use to transit out of the
router when this route is used.
Click Apply when you are done.
D-Link DSL-5300 User Manual
.
Click Save when you are done. If you edit or

IPv6

77