Admin - D-Link DSL-5300 User Manual

Tri-band wireless ac5300 gigabit vdsl modem router
Hide thumbs Also See for DSL-5300:
Table of Contents

Advertisement

Section 4 - Configuration
This page will allow you to change the administrator (Admin) password and enable
remote management.
In the Management menu on the bar on the top of the page, click Admin.
Password:
Enter a new password for the administrator account. You will need to
enter this password whenever you configure the router using a web
browser.
Enable
Enables a challenge-response test to require users to type letters or
Graphical
numbers from a distorted image displayed on the screen to prevent
Authentication
online hackers and unauthorized users from gaining access to your
(CAPTCHA):
router's network settings.
Enable Telnet
If you want to allow router setup via the protocols, you can configure
Server:
it here. For Telnet, click Enable Remote Management to allow
administrators to configure the network from outside. If you enabled
remote management, enter the remote port number that the router
will use for that protocol.
Enable HTTPS
Check to enable HTTPS to connect to the router securely. This means
Server:
to connect to the router, you must enter https://dlinkrouter.local./
instead of http://dlinkrouter.local./
Enable Remote
Remote management allows the DIR-860L to be configured from the
Management:
Internet by a web browser. A password is still required to access the web
management interface.
D-Link DSL-5300 User Manual

Admin

85

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ac5300

Table of Contents