D-Link DSL-5300 User Manual page 37

Tri-band wireless ac5300 gigabit vdsl modem router
Hide thumbs Also See for DSL-5300:
Table of Contents

Advertisement

Section 4 - Configuration
Select PPPoE if your Internet connection requires you to enter a PPPoE username and password. This information is provided by your Internet
Service Provider (ISP).
Username:
Enter the username provided by your ISP.
Password:
Enter the password provided by your ISP.
Reconnect
Select either Always-on, On-Demand, or Manual.
Mode:
Address Mode:
Select Static IP if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select Dynamic IP.
IP Address:
Enter the IP address provided by your ISP (Static IP only).
Service Name:
Enter the ISP service name (optional).
Primary DNS
Enter the primary DNS server IP address assigned by your ISP.
Server:
Secondary DNS
Enter the secondary DNS server IP address assigned by your ISP.
Server:
MTU:
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
MAC Address
The default MAC address is set to the Internet port's physical interface
Clone:
MAC address on the router. You can use the drop-down menu to
replace the Internet port's MAC address with the MAC address of a
connected client.
Click Save when you are done.
D-Link DSL-5300 User Manual
PPPoE
33

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ac5300

Table of Contents