Table of Contents
Advertisement
Section 4 - Configuration
In this section the user can configure the IPv6 6 to 4 connection settings. 6to4 is an IPv6 address assignment and automatic tunneling
technology that is used to provide unicast IPv6 connectivity between IPv6 sites and hosts across the IPv4 Internet.
6 to 4 Address:
Displays the 6 to 4 address.
6 to 4 Relay:
Enter the 6 to 4 relay supplied by your ISP.
Primary DNS
Enter the primary DNS server address.
Server:
Secondary DNS
Enter the secondary DNS server address.
Server:
LAN IPv6 Address:
Enter the LAN (local) IPv6 address for the router.
LAN IPv6 Link-
Local Address:
Displays the router's LAN link-local address.
Enable Automatic
IPv6 Address
Check to enable the Automatic IPv6 Address Assignment feature.
Assignment:
Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless
Autoconfiguration
Type:
DHCPv6.
Router
Enter the IPv6 address lifetime (in minutes).
Advertisement
Lifetime:
Click Save when you are done.
D-Link DSL-5300 User Manual
6 to 4
55
- Quick Links:
- Manual Setup
- Setup Wizard
Hide quick links:
Advertisement
Table of Contents
