Setting The Bluetooth Standby Mode “Bt Stby” - Sony STR-DH590 Help Manual

Help Guide
MULTI CHANNEL AV RECEIVER
STR-DH590
Setting the BLUETOOTH standby mode "BT STBY"
When a BLUETOOTH device is paired, you can set the BLUETOOTH standby mode so that the receiver can be
controlled by the BLUETOOTH device even when the receiver is in the standby mode.
This operation is only available using the display panel on the front of the receiver.
Press AMP MENU.
1
Select "<BT>" - "BT STBY" on the display panel.
2
Select the setting you want.
3
STBY ON: You can turn on the receiver from a BLUETOOTH device.
STBY OFF
Note
If a previously paired device is paired when the receiver is in standby mode, the
in red if "BT STBY" is set to "STBY ON".
Related Topic
List of settings that can be adjusted using the menu on the display panel
4-731-210-11(1) Copyright 2018 Sony Corporation
75
(power) indicator on the front panel lights up