Sony STR-DH590 Help Manual page 101

Help Guide
MULTI CHANNEL AV RECEIVER
STR-DH590
No image and/or sound is output from the TV when the receiver is in the standby
mode.
When the receiver enters the standby mode, image and/or sound from the HDMI device selected right before the
receiver entered the standby mode is output to the TV. If no image and/or sound is output, perform the following
operations:
Turn on the receiver, and then select the input to which the playback device is connected.
Press AMP MENU, then set "<HDMI>" - "CTRL.HDMI" to "CTRL ON," and then set "<HDMI>" - "STBY.THRU" to
"AUTO" or "ON" on the display panel.
If a device that supports the Control for HDMI function but is not manufactured by Sony is connected, press AMP
MENU and set "<HDMI>" - "CTRL.HDMI" to "CTRL ON" on the display panel.
4-731-210-11(1) Copyright 2018 Sony Corporation
101