Axis Ip Utility - Single Camera/Small Installation - Axis 211A Installation Manual

Page 8

AXIS IP Utility - single camera/small installation

AXIS IP Utility automatically discovers and displays Axis devices on your network. The
application can also be used to manually assign a static IP address.
Note that the computer running AXIS IP Utility must be on the same network segment
(physical subnet) as the AXIS 210/210A/211/211A.
Automatic discovery
1. Check that the AXIS 210/210A/211/211A is connected to the network and that power has
been applied.
2. Start AXIS IP Utility.
3. When the camera appears in the window, double-click it to open its home page.
4. See page 10 for instructions on how to assign the password.
Assign the IP address manually
1. Acquire an unused IP address on the same network segment as your computer.
2. Click the button
number and IP address for the AXIS 210/210A/211/211A. The serial number is located on
the product label.
3. Click the Assign button and follow the instructions.
4. Click the Home Page button to access the camera's web pages.
5. See page 10 for instructions on how to set the password.
Assign new IP address using serial number and enter the serial
AXIS 210/210A/211/211A Installation Guide