Table of Contents
Advertisement
Date and Time Settings: - Enter a new date and time in this field. The date and time use the
following format: date/month/year (dd/mm/yy) and hour:minute:second (hh:mm:ss)
Time Zone: - Select the time zone that corresponds to the local time zone from this list box.
Use NTP: - NTP (Network Time Protocol) is used to synchronise the unit‟s clock over a network.
There are many options in this list box. The details for each one are as follows:
Do Not Use NTP - select this option to turn off the time synchronisation feature.
One Time - the time is synchronized once the Save button is pressed.
On System Start Up - the time is synchronized once the SP8 is turned on or rebooted.
Once a Month/Week/Day/Hour - the time is automatically synchronised every month,
week, day, or an hour, respectively.
NTP Server 1 and 2:- Set the IP address of the NTP servers to be used. The NTP will
synchronise the time with the server that has the lower number of the stratum.
2. System tab
From the System tab you can input various settings for the unit. These settings are mostly
optional.
To get to the entry point of this tutorial please complete the following:-
1) Point a browser to the units IP address
2) Log in as administrator using the admin password
3) From the summary page click on the "System" tab
a) The following screen is displayed:-
- 14 -
SP8 Manual
Advertisement
Table of Contents
