jacarta SP8 User Manual page 11

SP8 Manual
Send Mail: - This toggles whether the send E-mail option is on or off.
SMTP Server: - The address of the SMTP server
SMTP Authentication: - Enable this option if the SMTP server requires authentication
SMTP Server Login Name: - The user name to login to the SMTP server
SMTP Server Password: - The password used to login to the SMPT server
E-mail subject: - The subject you wish to have for the e-mail e.g. "SP8 notification"
Timeout: - The timeout can be increased for SMTP servers that have poor connectivity. It is best
to leave this number as low as possible while still allowing for communication with the SMTP
server to continue.
Resend Intervals: - The time between which any resent e-mails will be sent
Maximum Times to Resend: - Set the number of times the notification e-mails will be resent.
Send Keep Alive Email: - This option will tell the unit to send a heartbeat e-mail. This is useful to
tell if the unit is still online or not.
Keep Alive Email Resend Interval: - The amount of time between which the keep alive e-mails
are sent.
After setting the parameters click the save button.
c) Below the „Mail Settings‟ there is another section. This is for configuring who the e-mails are
sent as and to be sent too.
Mail From: - The e-mail address which the e-mails appear from. Due to anti-spam features of
some SMTP servers this address must be authorized on the SMTP server otherwise the server
may deny the email.
- 11 -