Setting Up E-Mail Notifications - jacarta SP8 User Manual

Send Keep Alive Trap: - Will send a trap message at the preset time interval. This is useful for
informing the user as to whether the unit is still online, or for if you require collection of data at
regular intervals regardless of the sensors status.
Keep Alive Resend Intervals: - The time interval between the keep alive traps to be sent.
A different trap message is sent for each sensor type such as temperature, humidity, and switch.
The trap messages include 6 var bind fields that include the current sensor status (Normal,
Critical High, Warning High, Critical Low, Warning Low, and sensorError), the current sensor
value, the level exceeded, the sensor index, the sensor name and the sensor description.

2. Setting up E-mail notifications

As well as, or instead of, using SNMP traps E-mail notification can also be configured.
To get to the entry point of this tutorial complete the following :-
1) Point a browser to the IP address of the unit
2) Log in as administrator
3) Click the "Mail" tab from the summary page.
a) Click on the "Mail" tab and this brings up the mail configuration page. From here e-mail
notification can be configured.
b) The individual E-mail options are described in more detail as shown below.
- 10 -
SP8 Manual