Replacing the speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Using the alignment posts on the display-assembly base, place the speakers on
the display-assembly base.
2
Replace the four screws (M3 4+7.1 XZN) that secure the speakers to the display-
assembly base.
3
Route the speaker cable through the routing guides on the display-assembly
base.
4
Connect the speaker cable to the system board.
Post-requisites
1
Replace the
system-board
2
Replace the
back
3
Replace the stand.
computer. After working inside your computer, follow
After working inside your
shield.
cover.
computer. For more safety best
www.dell.com/
Before
63