Removing the antenna
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the stand.
2
Remove the
back
3
Remove the
system-board
4
Remove the
wireless
Procedure
1
Note the routing of the antenna cables, and remove it from the routing guides on
the display-assembly base.
2
Remove the two screws (M2x2.5) that secure the antennas to the display-
assembly base.
36
computer. After working inside your computer, follow
After working inside your
cover.
shield.
card.
computer. For more safety best
www.dell.com/
Before