Troubleshooting - Adaptec 29160 Manual

A SCSI C
DAPTEC
N
OTE
must be installed for your operating system. Installation of
the driver software varies depending on how and where you
purchased the Adaptec SCSI Card 29160.
Pre-loaded Adaptec Drivers
If the Adaptec SCSI Card 29160 was included as part of a com-
puter system you purchased, then the appropriate Adaptec driver
has already been pre-installed by the computer manufacturer and
you do not need to install it.
Embedded Adaptec Drivers
Some operating systems have embedded driver support for the
Adaptec SCSI Card 29160. To determine if the card is supported
by the operating system you are using, read the operating system
manual or contact the operating system vendor for information.
T
ROUBLESHOOTING
If you have any problems while installing the Adaptec SCSI Card
29160, check the following items first:
•
Are all SCSI devices powered on?
•
Are all SCSI cables and power cables properly connected?
•
Does each device on the SCSI bus have a unique SCSI ID?
•
Does the total SCSI cable length exceed the maximum allow-
able length? (See the Adaptec SCSI Card 29160 User's Guide
for more information.)
•
Is the SCSI bus properly terminated?
If you are still unable to resolve a problem, contact the system
manufacturer for help.
D
ARD
To use the Adaptec SCSI Card 29160, driver software
S
RIVER OFTWARE
11