Outdoor-rated rgbw cob led blinder
with modular design for deploying large arrays
reproduces the look and feel
of the classic halogen 4-cell blinder (10 pages)
www.eklights.com TROUBLE SHOOTING Before carrying out any operations with the unit, carefully read this instruction manual and keep it with cure for future reference. It contains important information about the installation, usage and maintenance of the unit. WARNING SAFETY Checklist and Remedies Problem Possible Causes General instruction...
www.eklights.com DIMENSIONS DESCRIPTION Brightest LED moving beam in its class Tight, solid, consistent beams Extensive rotating gobo pattern selection Featuring color wheel, rotating gobos, prism...
www.eklights.com DMX CHANNELS INTRODUCTION 000-002 Position 1 (open) 003-005 Position 2 006-008 Position 3 009-011 Position 4 012-014 Position 5 015-017 Position 6 018-020 Position 7 021-023 Position 8 024-026 Position 9 027-029 Position 10 030-032 Position 11 033-035 Position 12 036-038 Position 13 039-041...
www.eklights.com DMX CHANNELS INSTALLATION 12CH Function Value Percent/Setting Remark 000-255 Pan C oarse Pan fine 000-255 T ilt 000-255 T i l t C oarse T i l t fi ne 000-255 M ovem ent 000-255 fast est t o Sl ow est 000-010 Shut t er cl osed 011-030...
www.eklights.com DMX CHANNELS POWER CONNECTION Position 1(open) 000-002 003-005 Position 2 Using POWER CON In/Out 006-008 Position 3 Power cable connected in series Position 4 009-011 Attention:due to the power rating 012-014 Position 5 Power In one 1.5mm² power cable can connect 22 units maximum Power out 015-017 Position 6...
www.eklights.com DMX CHANNELS TECHNICAL SPECIFICATION PHOTOMETRICS 000-255 Pan Coarse Pan fine 000 -255 Light Source: 100W 8000 - 10000K LED Tilt 000 -255 T ilt Coarse Beam Angle: 2.5° T ilt fine 000-255 Output: 64500 LUX @ 5 meters Movement 000-255 fastest to Slowest POWER...
www.eklights.com MENU DESCRIPTION GOBO AND COLOR 1.CONNECT (1) DMX Address: Set DMX starting address from a value between 1-502 (2) DMX Mode: Selectable DMX mode 11/12 channels 2.SETUP (1) Movement 1.Pan Inverse and Tilt Inverse setting 2.Pan Feedback and Tilt Feedback setting (2) Screen 1.Back Light:set delay time for menu display to go dark at either 10,20 or 30 seconds or choose always ON.
www.eklights.com PHOTOMETRICS MENU DMX Address Default: 1 1-512 Beam Angle: 2.5° CON N ECT Default: 12CH 11CH DMX Mode 12CH FULL on Default: No Pan Inverse Y es Default: No T ilt Inverse Y es Movement Project Distance(m) Default: Yes Pan Feedback Y es luminance(lux)
Need help?
Do you have a question about the K4beam and is the answer not in the manual?
Questions and answers