Multi-rate ethernet extender provides high-speed lan connections between peered ethernet lans, remote pcs, or any othernetwork-enabled 10/100base-t device. (31 pages)
Page 1
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) SUPPORT FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 INFORMATION Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.blackbox.com • E-mail: info@blackbox.com...
FCC/IC RFI STATEMENTS, EU DECLARATION OF CONFORMITY FEDERAL COMMUNICATIONS COMMISSION AND INDUSTRY CANADA RADIO-FREQUENCY INTERFERENCE STATEMENTS Class B Digital Device. This equipment has been tested and found to comply with the limits for a Class B computing device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
DS3 PROVIDER BACKHAUL UNIT AND DS3 NETWORK EXTENDER KIT NORMAS OFICIALES MEXICANAS (NOM) ELECTRICAL SAFETY STATEMENT INSTRUCCIONES DE SEGURIDAD 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura.
NOM STATEMENT 12. Precaución debe ser tomada de tal manera que la tierra fisica y la polarización del equipo no sea eliminada. 13. Los cables de la fuente de poder deben ser guiados de tal manera que no sean pisados ni pellizcados por objetos colocados sobre o contra ellos, poniendo particular atención a los contactos y receptáculos donde salen del aparato.
Page 5
These instructions provide basic installation procedures for the DS3 Provider Backhaul Unit, 1-Port (LRA1216A). This Backhaul Unit also serves as the Provider Unit for the DS3 Network Extender Kit (LR0025A-KIT), which also includes a Subscriber Unit. The DS3 Network Extender Kit can be used to create a long-distance Ethernet connection across a DS3 circuit.
CHAPTER 2: Installation 2. Installation 1. Unpack the DS3 Provider Unit and its power supply. 2. Plug the power supply into both the power source and the back of the Unit. It doesn’t matter in which order you do this. Verify that the Unit’s Power LED is lit.
Page 7
Provider Unit in order to determine which type of cable is required. 6. LR0025A-KIT only: Repeat steps 1 through 5 for the Subscriber Unit. Its controls, indicators, and connectors work the same way as the Provider Unit’s, except that it gets its clock source settings from the Provider Unit, so you don’t need to set DIP-switch position 1.
CHAPTER 3: Operation 3. Operation While the Provider and Subscriber Units are plugged in and receiving power, they will operate continuously. Each Unit’s front-panel LEDs (which are also described on its bottom label) will show you how it’s operating: NOTE When a Provider or Subscriber Unit is in Red, Yellow, or Blue Alarm, its Ethernet link will be disabled and the Fast Ethernet LEDs (100, Act, and Lnk) will be steadily lit.
Page 9
DS3 PROVIDER BACKHAUL UNIT AND DS3 NETWORK EXTENDER KIT • Fast Ethernet 100 and Lnk LEDs (both green): – If they’re both steadily lit, a 100-Mbps Fast Ethernet connection has been established, unless the Act LED is also steadily lit and the DS3 Lnk LED is dark, in which case a DS3 alarm is occurring.
If you determine that your DS3 Provider Unit or Network Extender Kit is malfunctioning, do not attempt to alter or repair it. It contains no user-serviceable parts. Contact Black Box Technical Support at 724-746-5500. Before you do, make a record of the history of the problem. We will be able to...
Need help?
Do you have a question about the LR0025A-KIT and is the answer not in the manual?
Questions and answers