236 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
NOTE: ParkSense will reduce the volume of the radio, if
on, when the system is sounding an audio tone.
Adjustable Chime Volume Settings
Rear chime volume settings can be selected from the
Customer-Programmable
Uconnect System, refer to "Uconnect Settings" in "Un-
derstanding Your Instrument Panel" for further informa-
tion.
The chime volume settings include LOW, MEDIUM, and
HIGH. The factory default volume setting is MEDIUM.
ParkSense will retain its last known configuration state
through ignition cycles.
Features
section
of
Enabling And Disabling ParkSense
ParkSense can be enabled and disabled with the
ParkSense switch.
When the ParkSense switch is pushed to disable
the system, the instrument cluster will display
the
the "PARKSENSE OFF" message for approxi-
mately five seconds. Refer to "Driver Informa-
tion Display (DID)" in "Understanding Your Instrument
Panel" for further information. When the shift lever/gear
selector is moved to REVERSE and the system is disabled,
the DID will display the "PARKSENSE OFF" message for
as long as the vehicle is in REVERSE.
The ParkSense switch LED will be ON when ParkSense is
disabled or requires service. The ParkSense switch LED
will be OFF when the system is enabled. If the ParkSense
switch is pushed, and the system requires service, the
ParkSense switch LED will blink momentarily, and then
the LED will be ON.