Dodge 2016 Durango Owner's Manual page 363

NOTE: Only one category may be selected at a time.
To adjust the setting of a programmable feature, press the
desired setting option. Once in the desired setting option,
press and release the preferred setting until a check-mark
appears next to the setting, showing that the setting has
been selected.
Once the setting is complete, press the Back Arrow
button on the touchscreen to return to the previous menu
or press the X button on the touchscreen to close out of
the settings screen. Pressing the Up or Down Arrow
button on the right side of the screen will allow you to
toggle up or down through the list of available settings.
Display
After pressing the "Display" button on the touchscreen
the following settings will be available.
UNDERSTANDING YOUR INSTRUMENT PANEL 361
• Display Mode
When in this display you may select one of the auto
display settings. To change Mode status, select from
"Day," "Night" or "Auto" until a check-mark appears
next to the setting, showing that setting has been se-
lected.
NOTE: When Day or Night is selected for the Display
Mode, the usage of the Parade Mode feature will cause
the radio to activate the Display Brightness Day control
even though the headlights are on.
• Display Brightness With Headlights ON
When in this display, you may select the brightness with
the headlights on. Adjust the brightness with the "+" and
"–" setting buttons on the touchscreen or by selecting any
point on the scale between the "+" and "–" buttons on the
touchscreen.
4