Engine Oil Life Reset - Dodge 2016 Durango Owner's Manual

Hide thumbs Also See for 2016 Durango:
Table of Contents

Advertisement

Engine Oil Life Reset

Oil Change Required
Your vehicle is equipped with an engine oil change
indicator system. The "Oil Change Required" message
will display in the DID for five seconds after a single
chime has sounded, to indicate the next scheduled oil
change interval. The engine oil change indicator system
is duty cycle based, which means the engine oil change
interval may fluctuate, dependent upon your personal
driving style.
Unless reset, this message will continue to display each
time you cycle the ignition to the ON/RUN position. To
turn off the message temporarily, push and release the
OK button. To reset the oil change indicator system (after
performing the scheduled maintenance), refer to the
following procedure.
UNDERSTANDING YOUR INSTRUMENT PANEL 329
Oil Change Reset Procedure
1. Without pushing the brake pedal, push and release the
ENGINE START/STOP button and place the ignition
to the ON/RUN position (do not start the engine).
2. Fully push the accelerator pedal, slowly, three times
within 10 seconds.
3. Without pushing the brake pedal, push and release the
ENGINE START/STOP button once to return the
ignition to the OFF/LOCK position.
NOTE: If the indicator message illuminates when you
start the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.
4

Advertisement

Table of Contents
loading

Table of Contents