Overview Of Plants; Factors Influencing Vaporization; The Craft Y Vaporizer - Storz & Bickel GMBH Crafty Instructions For Use Manual

4 . O V E R V I E W O F P L A N T S
Below is an overview of the plants that
are suitable for vaporization in the
CRAFT Y Vaporizer.
The aromas and fragrances from the
plant materials listed below may be
vaporized.*
Plant name Botanical name
Eucalyptus Eucalyptus globulus
Hops Humulus lupulus
Chamomile Matriarca chamomilla the blossoms
Lavender Lavandula angustifolia the blossoms
Lemon balm Melissa officinalis
Sage Salvia officinalis
Thyme Thymus vulgaris
WARNING:
Please consult your doctor
or pharmacist if you have any
medical concerns. It is possible that
some plants may cause allergic reac-
tions for the user. If this occurs, it is
urgently recommended to refrain from
further use of such plants.
Only use the plant parts which are
found in this list and which have been
verified according to the regulations
of the European or any other pharma-
copoeia with regard to genuineness,
purity and pathogenic germs. You can
purchase such plants or plant parts in
pharmacies.*
Any other use is inappropriate and po-
tentially dangerous.
Portion of the Temperature-
plant used setting
the leaves 130°C (266°F)
the cones 154°C (309°F)
190°C (374°F)
130°C (266°F)
the leaves 142°C (288°F)
the leaves 190°C (374°F)
the herb 190°C (374°F)
It is important to observe the follow-
ing instructions in order to set the
CRAFT Y
Vaporizer with the plant material in the
best possible way for your personal re-
quirements.
*This statement has not been evalu-
ated by the FDA. The CRAFT Y Vapor-
izer is not a medical device and is not
intended to diagnose, treat, cure or pre-
vent any disease.
12
5 . FA C T O R S I N F L U E N C I N G VA P O R I Z AT I O N
The amount of aromas and fragrances
released can be influenced by the fol-
lowing factors:
1. Quality: The amount of aroma or
fragrance contained in the respec-
tive plant material that can be va-
porized.
2. Quantity: The amount of vaporiza-
tion material in the Filling Chamber.
3. Surface: The finer the plant is
ground, the greater the surface and
the more aromas and fragrances
can be released during the vapori-
zation cycle.
4. Temperature: The higher the tem-
peratures, the more aromas and
fragrances will be released at once.
6 . T H E C R A F T Y VA P O R I Z E R
Unpacking
The box contains all components as
well as the Instructions for Use. Keep
the Instructions for Use for future ref-
erence.
Remove the Vaporizer and the acces-
sories from the box. Immediately after
unpacking, check whether the Vaporiz-
er, the accessories, the power adapter
and the device plug are all included in
the delivery and work properly. If you
notice any defects, inform the seller or
the delivery agent immediately.
Please note: Increasing the tempera-
ture should be the last resort, because
plant material tastes more roasted
when using higher temperature.
Since the plant ingredients are released
in a gentle manner, the vaporization
cycle may be repeated with the same
contents in the Filling Chamber. De-
pending on the four factors described
above, the Filling Chamber contents
may be reused multiple times until the
aromas and fragrances are released
completely.
If no more vapor is produced at the
highest temperature, then the vapori-
zation material is completely exhaust-
ed and must be replaced with new
material. However, for the best aroma
results it is advisable to replace the
vaporization material before this point.
The packing material (plastic
bags, boxes etc.) must be kept
out of the reach of children as
it is a potential source of danger.
Please dispose of the packing mate-
rial in a proper and environmentally
friendly manner.
We recommend keeping the original
packaging in case it is required later
(transport, Storz & Bickel Service Cent-
er etc.).
13