Table of Contents
Advertisement
3.7
SP-COP-CARD1 removable storage
888373387
3.7.1
Description
888374923
The system configuration of the entire samosPRO system is stored in the SP-COP-CARD1 pro-
gram removable storage. This has the advantage that the samosPRO system does not have to
be reconfigured when modules are replaced.
The SP-COP-CARD1 removable storage is an SD card that is produced and formatted specially
for use in the controller modules.
Important information
NOTICE
• The data stored in the SP-COP-CARD1 program removable storage will be retained even
if the supply voltage is interrupted.
• When replacing a module, make sure that the program removable storage is inserted into
the appropriate controller module. Mark all of the connection lines and plug connectors
on the samosPRO system clearly to prevent mixups.
• Commonly available SD cards cannot be used/inserted in samosPRO and controller mo-
dules.
• The replacement of a verified user project can be recognized on the entry of the diagnos-
tic number 24230000.
• After the user project is transfered to the SD card and the user project has been replaced
by replacing the SD card, the correct function of the safety application must be checked.
• Make sure that the SD card cannot be replaced by authorized personnel.
ATTENTION
Wieland Electric GmbH | BA000966 | 08/2017 [8151]
Product description
29
Advertisement
Table of Contents
