DIR-815/AC Wireless AC1200 Dual Band Router
with 3G/LTE Support and USB Port
User Manual
Print Server
On the Print Server page, you can configure the router as a print server. Being configured in this
way, the router will allow your LAN users to share the printer connected to the USB port of the
router.
To connect a printer to the router, power off both devices. Connect the printer to the USB port of the
router, power on the printer, then power on the router.
To configure the router as a print server, move the Enable print server switch to the right and
click the APPLY button.
If you don't want to use the router as a print server, move the Enable print server switch to the
left and click the APPLY button.
Figure 109. The Print Server page.
Page 143 of 221
Configuring via Web-based Interface