D-Link DIR-815/AC User Manual page 112

DIR-815/AC Wireless AC1200 Dual Band Router
with 3G/LTE Support and USB Port
User Manual
Figure 92. Configuring the local interface. The IPv6 tab. The DHCP section.
Parameter
Mode
Autoconfiguration
mode
Start IP
End IP
Lease Time
When all needed settings are configured, click the APPLY button.
DHCP
Select a mode of IPv6 address assignment from the drop-down list.
Server: the router assigns IPv6 addresses to clients automatically in
accordance with the specified parameters. When this value is
selected, the Autoconfiguration mode drop-down list and the
Lease time field are displayed on the tab.
Disable: clients' IPv6 addresses are assigned manually.
Select a mode from the drop-down list.
Stateless: clients themselves configure IPv6 addresses using the
prefix.
Stateful: the built-in DHCPv6 server of the router allocates
addresses from the range specified in the Start IP and End IP
fields.
The start IPv6 address of the address pool used by the DHCPv6
server to distribute addresses to clients.
The end IPv6 address of the address pool used by the DHCPv6
server to distribute addresses to clients.
The lifetime of IPv6 addresses provided to clients. The field is
available for editing, if the Static value is selected from the
Addressing mode list in the IP section.
Page 112 of 221
Configuring via Web-based Interface
Description