Table of Contents
Advertisement
DIR-815/AC Wireless AC1200 Dual Band Router
with 3G/LTE Support and USB Port
User Manual
Back Panel
Port
WPS
WIFI
LAN 1-4
INTERNET
USB
12V DC IN
POWER
The RESET button located on the bottom panel of the router is designed to restore the factory
default settings. To restore the factory defaults, push the button (with the device turned on), hold it
for 10 seconds, and then release the button.
Figure 2. Back panel view.
A button to set up a wireless connection (the WPS function).
To use the WPS function: with the device turned on, push the button,
hold it for 2 seconds, and release. The WPS LED should start
blinking.
A button to enable/disable wireless network.
To disable the router's wireless network: with the device turned on,
press the button and release. The 2.4G WLAN and 5G WLAN LEDs
should turn off.
4 Ethernet ports to connect computers or network devices.
A port to connect
to a cable or DSL modem or to a private Ethernet
line
(it is recommended to use the cable included in the delivery
package).
A port for connecting a USB device (modem, storage, printer).
Power connector.
A button to turn the router on/off.
Page 18 of 221
Description
Overview
Advertisement
Table of Contents
