Table of Contents
Advertisement
DIR-815/AC Wireless AC1200 Dual Band Router
with 3G/LTE Support and USB Port
User Manual
Then in the LAN section, from the Bridged with drop-down list of the element corresponding to
the LAN port or wireless interface to which the additional device is connected, select the created
connection. Click the APPLY button.
!
The selected port or wireless interface cannot use the default connection to access the
Internet.
To deselect the port or wireless interface in the simple mode, left-click the selected element (the
frame will disappear) and click the APPLY button.
To deselect the port or wireless interface in the advanced mode, select the No value from the
Bridged with drop-down list of the element corresponding to the needed LAN port or interface.
Then in the WAN section, select the connection via VLAN which will not be used any longer and
click the REMOVE button. Then click the APPLY button.
Page 67 of 221
Configuring via Web-based Interface
Advertisement
Table of Contents
