Valve Side Digital Output Modules; Sixteen Outputs Per Connector - Sub-D 25 Pin Female Module - Emerson numatics g3 series Technical Manual

G3 Series PROFIBUS‐DP Technical Manual

Valve Side Digital Output Modules

The valve side output module is used to distribute available valve side output points via a Sub-D connector (i.e.
when a Sub-D valve manifold is located away from the rest of the electronics). This module goes to the right of
the G3 valve adapter. The 16 bit output module utilizes the last 16 output bits on the valve side of the manifold
(bits 16-31)

Sixteen Outputs per Connector - Sub-D 25 Pin Female Module

Module Short Circuit
I/O Type Output Points Module Size
Part No. Protection
239-1713 NPN (Sinking) Yes 16 Narrow
TDG3PTTM1-2EN 02/09
Subject to change without notice
www.numatics.com/g3
Page 43