Setting The Number Of Rings - Radio Shack TAD-1009 Owner's Manual

43-781.fm Page 9 Monday, August 16, 1999 7:41 AM
2. Press . The TAD says
1/TIME
"Press one for Monday. Press two
for Tuesday. Press three for
Wednesday. Press four for Thurs-
day. Press five for Friday. Press
six for Saturday. Press seven for
Sunday."
illustration
3. Press a number button to set the
day of the week. The TAD says
the day of the week and "Enter the
time."
4. Press two digits for the hour. The
TAD says the hour.
Note: If you make an invalid entry
(for example,
00
beeps three times and repeats
"Enter the time."
5. Press two digits for the minute.
The TAD says the minute and
"Press one for AM, two for PM."
Note: If you make an invalid entry
(for example,
66
not respond. Make a correct entry
within 7 seconds.
6. Press or . The TAD says the
1 2
current day and time.
To hear the current day of the week
and time at any time, press
or ), the TAD
13
), the TAD does
.
TIME
SETTING THE NUMBER
OF RINGS
The TAD is preset to sound 4 rings be-
fore it answers the first call. Follow
these steps to change the number of
rings (from 2-9).
Notes:
• If you plan to check your mes-
sages by long distance, set the
number of rings to at least four to
avoid unnecessary long distance
charges when you call by remote
to check your messages (see
"Using the Toll Saver").
• In Steps 2 and 3, you must enter
your selection within 7 seconds.
otherwise, the TAD beeps three
times then exits the programming
mode. If this happens, start over
again at Step 1.
illustration
1. Press The TAD beeps
PGM/DEL.
once.
2. Press . The TAD beeps
3/RING
once.
3. Enter the number of rings you
want (up to 9). The TAD repeats
the number, then beeps twice.
9