Table of Contents
Advertisement
43-781.fm Page 8 Monday, August 16, 1999 7:41 AM
PREPARATION
Complete the procedures in this sec-
tion before you set the TAD to answer
calls.
Notes:
• The keypad is located under the
cover on the front of the TAD. Lift
the cover to access the keys.
illustration
• Before you begin any of the pro-
cedures in this section, be sure
the TAD is turned on (see "Turning
the TAD On/Off").
TURNING THE TAD
ON/OFF
To turn on the TAD, simply press
so ON LINE turns on.
OFF
illustration
To turn the TAD off, press
again so ON LINE turns off.
8
Notes:
• Once you turn the TAD on, it is set
to answer calls (see "Setting the
TAD
Calls").
• You can also turn the TAD on
remotely (see "Remote Answer-
On").
SETTING THE DAY
AND TIME
You must set the current day and time
so the TAD will record the day and time
(date stamp) on each memo, incoming
message, and 2-way conversation it
records.
Notes:
• If you do not set the date and
time, the TAD will not record a
date stamp.
ON/
• In Steps 2-6, you must enter your
selection within 7 seconds after
the
instruction. Otherwise, the TAD
beeps three times, then exits the
program mode. If this happens,
start over again at Step 1.
1. Press
ON/OFF
once.
to
Answer/Not
Answer
TAD
finishes
saying
. The TAD beeps
PGM/DEL
illustration
the
Advertisement
Table of Contents
