Resetting The Tad - Radio Shack TAD-1009 Owner's Manual

43-781.fm Page 24 Monday, August 16, 1999 7:41 AM

RESETTING THE TAD

If the TAD locks up for an unknown
reason or does not operate properly,
you might need to reset it.
Important: Resetting the TAD deletes
all recorded messages (including any
outgoing announcements), date and
time settings, number of rings, mes-
sage length, and the remote operation
code.
Use a pointed object, such as a
straightened paper clip, to press
SET .
illustration
24
The TAD initializes itself and the ON
LINE, MEMO, and PLAY indicators
flash six times. Then the ON LINE indi-
cator lights steadily.
Repeat all of the procedures in "Prep-
aration" before you begin using the
TAD.
RE-
illustration