Table of Contents
Advertisement
43-795.fm Page 9 Monday, August 16, 1999 9:07 AM
1. To record the OGM 1 (or OGM 2)
message, hold down
) until the TAD beeps and the
OGM 2
timer starts counting.
Note: As soon as the TAD beeps,
release
(or
OGM 1
Otherwise, the TAD records a "pop"
sound at the beginning of the outgo-
ing message.
2. Speak your message from about 8
inches from the front of the TAD.
3. When you finish, press
TAD beeps and plays back the out-
going message.
Checking the Outgoing
Messages
To check an outgoing message, press
its button (
or
OGM 1
the announcement number and the
message plays.
If there is no announcement recorded,
you hear "You have no announcement
one" (or "two") when you press its but-
ton.
(or
OGM 1
) quickly.
OGM 2
. The
STOP
). You see
OGM 2
SETTING THE NUMBER
OF RINGS
Set the ring select switch to
to set how long the TAD waits before it
answers a call (2 rings, 4 rings, 7 rings
or toll-saver).
If you plan to check your messages by
long distance, set the ring select switch
to
(see "Using the Toll-Saver" on
TS
Page 15).
,
,
,or
2
4
7
TS
9
Advertisement
Table of Contents
