Table of Contents
Advertisement
43-747.fm Page 17 Friday, August 13, 1999 2:22 PM
REMOTE OPERATION
You can operate the TAD from almost
any touch-tone phone, or from a rotary
phone using a pocket tone-dialer (avail-
able at your local Radio Shack store).
The TAD's remote operation security
code is preset to 747. You can operate
your TAD remotely with this code; how-
ever, we recommend that you set your
own code.
Notes:
• When the memory is full, the TAD
answers the call after two rings and
announces, "Memory is full."
• To bypass the outgoing message
and begin recording a message
immediately when you call the TAD
from a remote phone, you can
press
on touch tone phones (or a
]
pocket tone dialer if you use a
rotary phone) when the announce-
ment begins. The TAD skips the
rest of the announcement, beeps
once, and begins recording.
CHANGING THE REMOTE
OPERATION SECURITY
CODE
Notes:
• You can set the security code to
any number from 500 to 999.
• Be sure to set each digit within 8
seconds. Otherwise, you must start
over from Step 1.
• Do not use three identical digits
(such as 999) for the security code.
Numbers like this are too easy for
others to guess!
• If AC power fails and no battery is
installed or if the backup battery
becomes weak, the remote opera-
tion security code automatically
resets to 747.
1. Press and hold
CODE
seconds. The TAD beeps, and the
first digit of the preset code
appears on the display.
for about 2
17
Advertisement
Table of Contents
