Remote Answer-On - Radio Shack TAD-1007 Owner's Manual

43-747.fm Page 18 Friday, August 13, 1999 2:22 PM
2. Press or
SKIP REPEAT
first digit, then press
beeps and the second digit flashes.
3. Press or
SKIP REPEAT
second digit, then press
TAD beeps and the third digit
flashes.
4. Press or
SKIP REPEAT
third digit, then press
TAD beeps.
To see the new code, press and release
.
CODE
18
to set the

REMOTE ANSWER-ON

. The TAD
STOP
Note: You must record an outgoing
message before you can remotely set
the TAD to answer calls.
Follow these steps to remotely set the
TAD to answer calls.
1. Dial your phone number.
to set the
. The
STOP
2. Enter the remote operation security
to set the
. The
STOP
3. Press
4. You can hang up at this point and
If the TAD is set to answer-off, it
answers the call after 60 seconds
and announces, "Answer off."
code within 8 seconds. The TAD
beeps.
Note: If you do not enter each digit
of the security code within 8 sec-
onds, the TAD hangs up.
. The TAD beeps and
#
announces, "Answer on."
have the TAD answer calls, or you
can enter other remote
mand(s) (see "Using Remote Com-
mands").
com-