Unmounting the microSDHC Card
To prevent damage to data stored on the microSDHC card, unmount
the card before removing it from Spro2.
1. From the SETTINGS tab of the home screen, touch System >
Device > Storage > Unmount SD card.
2. At the prompt, read the warning and touch OK to continue.
3. When the Unmount SD card menu changes to Mount SD card,
you can now safely remove the microSDHC card from Spro2.
Charging the Battery
You should fully charge the battery before using Spro2. Out of the box
the battery should have enough power for Spro2 to turn on.
WARNING!
Use only ZTE-approved chargers and cables. The use of
unauthorized accessories may cause damage.
17