Cybernet CyberMed-NB22 Series User Manual page 10

11. If water has seeped in, immediately disconnect the Power- Then contact a service
technician for repairs.
Ventilation Spacing
1. This unit is sealed and there are no opening on front or back side, however, there are
battery doors and side USB port doors that are also sealed. The only gap is in the I/O
area where air can flow in-no risk of cleaning sprays getting inside the unit.
2. Unless proper ventilation is present, do not place unit in an enclosed area; such as a
built-in shelf. Keep a minimum distance of 10 cm between the LCD PC unit and wall.
Cleaning the unit
1. Remember to turn off the power source and to unplug the cord from the outlet before
cleaning the unit.
2. Carefully dismount the unit or bring the unit down from suspension to clean.
3. Please use a dry soft cloth to clean the unit.
4. Take a dry cloth and wipe the unit dry. Remember to avoid having liquids seep into
the internal components and areas of the LCD PC unit.
Servicing, Repairing, Maintenance & Safety Checks
1. If the unit is not functioning properly, observe the performance level of the LCD PC
closely to determine what type of servicing is needed.
2. Do not attempt to repair the LCD PC unit on your own. Disassembling the cover
exposes users' to high voltages and other dangerous conditions. Notify and request a
qualified service technician for servicing the unit.
3. To avoid risk of electric shock, this equipment must only be connected to a supply
mains with protective earth.
4. If any of the following situations occur turn the power source off and unplug the unit.
Then contact a qualified service technician.
(a) A liquid was spilled on the unit or objects have fallen into the unit.
(b) The unit is soaked with liquids.
(c) The unit is dropped or damaged.
(d) If smoke or strange odor is flowing out of the operating unit.
(e) If the power cord or plug is damaged.
(f) When the functions of the unit are dysfunctional.
10
NB22 Users Manual