Console Connection - D-Link DIS-300G Series Quick Installation Manual

Console Connection

The Console port is for local management by using a terminal emulator or a computer with
terminal emulation software.
● DB9 connector connect to computer COM port
● Baud rate: 115200bps
● 8 data bits, 1 stop bit
● None Priority
● None flow control
To connect the host PC to the console port, a RJ45 (male) connector-to-RS232 DB9
(female) connector cable is required. The RJ45 connector of the cable is connected to the
CID port of the switch; the DB9 connector of the cable is connected to the PC COM port.
The pin assignment of the console cable is shown below:
Quick Installation Guide
6