D-Link DIS-200G-12S Quick Installation Manual
Dis-200g series, industrial
Hide thumbs
Also See for DIS-200G-12S:
- Hw installation manual (47 pages) ,
- Quick installation manual (16 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for D-Link DIS-200G-12S
Summary of Contents for D-Link DIS-200G-12S
-
Page 1: Quick Installation Guide
Quick Installation Guide Industrial Ethernet Switch This document will guide you through the basic installation process for your new D-Link Industrial Ethernet Switch. DIS-200G Series Quick Installation Guide Documentation is also available on the D-Link website... -
Page 3: Led Indicators
• Quick Installation Guide Table 1 • Console cable If any of the above items are damaged or missing, please contact your local D-Link reseller. DIS-200G-12PS/PSW Hardware Overview LED Indicators 3, 4, 5 2, 3 Figure 2 Figure 1... -
Page 4: Front Panel Connectors
15.4 and 30 W. Blinking The PoE output on the port is over 30 W amber and the port has been shut down. Table 2 DIS-200G-12S/SW Figure 4 1, 2 Item Description This is the reset button which is used to Reset perform a factory reset. - Page 5 Rear Panel Connectors requirements are investigated before mounting the DIS-200G, as access to the switch may be restricted once it has been installed. Mounting the Switch on a DIN Rail Before beginning either mounting or removing the DIS-200G from a DIN rail, please ensure that the DIN rail is level and that the DIN rail mounting kit is Figure 5 installed correctly on the DIS-200G.
-
Page 6: Mounting The Switch In A Rack
Mounting the Switch in a Rack 5. Align the switch with the wall anchors and secure the switch to the wall using the appropriate The DIS-200G can be mounted in a standard 19” screws for the wall anchors. server rack by using the included rack mounting brackets (optional). -
Page 7: Connecting To A Power Source
If you only wish to use one power source, insert (DNA), console port, Telnet, or Simple Network the wires into V1-/V1+ (PWR1). This diagram is Management Protocol (SNMP) management also provided on the DIS-200G: interfaces. If you wish to manage a single D-Link switch, the... -
Page 8: Web User Interface
IP address, which is used for communication with the management PC. However, https://chrome.google.com/webstore if you wish to manage multiple D-Link switches, DNA 2. Click the ‘ADD TO CHROME’ button on the right- may be the best option. You do not need to change hand side of the search results. -
Page 9: Additional Information
SNMP D-Link support website. You can manage the switch with D-Link D-View, or Warranty Information any other SNMP-compatible program. The SNMP function is disabled by default and must be enabled http://warranty.dlink.com/... - Page 10 Notes...
- Page 11 Notes...
- Page 12 Notes...
- Page 13 Notes...
- Page 14 Notes...
- Page 16 Ver. 1.01(WW)_130x183 2017/09/05...