Roland EXR-5 Service Note page 15

SWITCH TEST
Pressing button 1, you enter the Switch test:
Press the buttons on the control panel one by one in sequence. The display visualizes the name
of the button pressed and you hear a sound.
The switch test ends when all the control panel's buttons have been pressed and the system goes
automatically back to the main menu (Sw, Le, Lc, Be).
If you want to exit before pressing all the buttons, you can go back to the main menu (Sw, Le, Lc,
Be) by keeping the buttons 1 and 0 pressed at the same time.
LED TEST
Pressing button 2, the display visualizes :
The LEDs light up in sequence. At the end of the sequence they are all on.
To exit, press button 0 (Exit).
LCD TEST
Pressing button 3, the display visualizes:
Pressing button 1 (ON), the display visualizes:
Press button 0 (Exit) to get back to the previous menu page.
Pressing button 2, the display shows the characters and symbols that are visualized when off.
Press 0 (Exit) twice to go back to the main menu.
TEST LED
ON OFF
EXR-5
17