Docomo Aquos Phone F SH-13C Instruction Manual page 45

If the settings of MCC and MNC are changed
and they do not appear on the screen, reset the
settings or set the access point manually.
Resetting access point
Reset an access point to default setting.
1
In the home screen,
[Settings]/[Wireless &
networks]/[Mobile
[Access Point
[Reset to default]
When sp-mode is not subscribed or if you failed
to perform automatic setting of access point
due to signal status such as outside the service
area etc., you are required to set the access
point again manually.
sp-mode
sp-mode is an ISP owned by NTT DOCOMO for
the Smartphone. In addition to the Internet
connection, mail service with the same address
you use on i-mode (@docomo.ne.jp) is
available. sp-mode is a paid service that
requires subscription. For details on sp-mode,
refer to DOCOMO website.
mopera U
mopera U is an ISP owned by NTT DOCOMO. If
you subscribe to mopera U, you can use
Internet with easy setting. mopera U is a paid
service that requires subscription.
[R]/
networks]/
Names]/z/
Setting mopera U
1
In the home screen,
[Settings]/[Wireless &
networks]/[Mobile
[Access Point Names]/[mopera
U(
U(Smartphone flat-rate))/[mopera U
] (mopera U settings)
mopera U (mopera U settings) is an
access point for mopera U settings. When you
use the access point for setting mopera U,
packet communication charges are not
incurred. Note that you can connect to only the
initial setting screen or the change setting
screen. For details on mopera U settings, refer
to the mopera U website.
To use mopera U(
(mopera U(Smartphone flat-rate)), subscription
to flat-rate packet communication services is
required. For details on mopera U (Smartphone
flat-rate), refer to DOCOMO website.
Wi-Fi settings
If you use Wi-Fi function of the FOMA terminal,
you can use mail or internet by connecting to
your home, corporate network or access points
of public wireless LAN service.
Before Using the Handset
[R]/
networks]/
)] (mopera
)
43